版权与许可 / Copyright & licenses

Software license / 软件许可

Download / 下载原文

VEX CAD Online — Proprietary Software Notice
Version 1.0 — 2026-11-06

Copyright (c) 2026 He Jiajun, for original contributions whose rights are held by
He Jiajun. Other contributions remain with their respective rights holders.
All rights reserved, except as expressly stated below.
Project website: https://cad.varlet.cn/

1. Scope
This notice applies only to original software, documentation and assets for
which the project copyright holders have the necessary rights. It does not
claim ownership of third-party software, CAD models, part libraries, trademarks,
user content, or material not protected by copyright. See
THIRD_PARTY_NOTICES.md for third-party notices and license information.
This project is not offered under an open-source license.

2. Permission to use the hosted application
You may access and use the application at cad.varlet.cn through its intended
interface, including for teaching, coaching and your own projects. Downloading,
caching and executing the client software as necessary for that normal browser
use is permitted. This permission does not authorize a separately hosted copy.

3. No general redistribution or self-hosting permission
Except for the permission above, a separate written authorization, or rights
provided by applicable law, no permission is granted to copy, modify,
redistribute, sublicense or sell the original software, or to deploy it or a
modified version as a separate website or service, whether paid or free.
Access to source code or browser-delivered code is not such authorization.

4. User work and third-party rights
This notice does not transfer ownership of your original models, lessons or
other content to the project, or restrict their export merely because they
were made using this application. Included third-party geometry, images,
software and other material remain subject to their own rights and licenses.
Those licenses govern the respective components and take precedence over any
conflicting restriction here. In particular, this notice does not restrict
modification, redistribution, replacement or reverse engineering where those
rights are granted by a component's license (including the LGPL) or by law.
For LGPL 2.1 section 6, you may copy the provided browser runtime locally,
modify the work for your own use, replace the LGPL components and reverse
engineer to debug those modifications. This exception takes precedence over
sections 2 and 3; it is not a general grant to republish the proprietary app.
No trademark, patent or third-party CAD permission is granted by this notice.
Previously granted valid licenses are not revoked by this notice.

5. Warranty and mandatory rights
To the extent permitted by applicable law, the original software is provided
as is, without warranty of fitness, accuracy, availability or noninfringement.
Nothing here excludes liability that cannot lawfully be excluded, or limits
mandatory user rights, statutory exceptions or independent development of
similar functionality. This notice is not a guarantee of legal clearance.

中文说明(与上述范围一致)

本项目原创部分采用专有软件权利保留声明,不采用开源许可证。He Jiajun 仅就其
依法享有权利的原创部分声明权利;其他贡献归相应权利人,不因本文件转让。
允许通过 cad.varlet.cn 正常使用工具,包括教学、教练工作、创建及导出自己的
模型和教程,以及为此必需的浏览器下载、缓存和执行。

除上述使用、另行书面授权或法律允许外,不授予复制、修改、再分发、出售或
将本软件及其修改版另行部署为网站或服务的许可,无论是否收费。
用户原创内容不因使用本工具而归项目所有。第三方组件、零件几何、商标等
仍遵循各自许可;本声明不限制其许可已经授予的权利,也不撤回既有有效许可。
为行使 LGPL 2.1 第 6 条权利,可在本机复制发布产物、为自己使用而修改、替换
LGPL 组件,并为调试这些修改进行逆向工程;此例外优先于上述一般限制,不等于
获得将原创网站另行公开发布的通用许可。
法定例外及不能排除的责任不受影响。本声明不保证第三方资源已获得充分授权。

Website use / 网站使用

Download / 下载原文

# 网站使用与版权说明 / Website use and copyright

版本 / Version:1.0 · 2026-11-06

## 正常使用

本网站目前以非营利方式运营,面向教师、教练及学生提供机器人搭建与教学工具;这描述的是运营用途,不表示运营者已登记为非营利法人。

欢迎通过 [cad.varlet.cn](https://cad.varlet.cn/) 搭建模型、编排教程、用于课堂或教练工作,并导出自己的成果。免费提供网站使用,不等于授予网站程序的再分发或自行部署许可。原创软件的许可边界见 [LICENSE.txt](LICENSE.txt)。

项目不因你使用工具而取得你的原创模型或教程的所有权。导出的模型、图纸、视频或分享文件如含第三方零件几何、图像或其他资料,仍需遵守对应权利和许可;本工具不能替第三方授权。用户本机导入不等于取得再分发权。

## 原创软件与第三方资料

网站原创程序及其打包产物的复制、修改、另行部署或再分发,除正常访问所需、法律允许或单独书面授权外,未获许可;免费镜像站也不例外。这不限制依法独立开发相似功能。

第三方组件和零件各自适用的许可优先,不受上述原创软件限制覆盖。完整来源说明见 [THIRD_PARTY_NOTICES.md](THIRD_PARTY_NOTICES.md)。本项目不是 VEX Robotics、LDCad 或 LDraw 的官方产品,不表示得到其认可或担保。

## 模型与可用性

模型、吸附、碰撞提示和装配动画是设计与教学辅助,不是实物安全、制造精度或竞赛合规认证。请在实际搭建前核对零件、尺寸和安装过程。浏览器本地存储不是云备份,请定期导出。

在维护、技术故障或权利审查时,资源可能被调整或停止提供。下架不会删除你已有模型中的原始引用或主动清除你的本地文件,但模型可能显示缺件。任何免责声明均不排除适用法律不允许排除的责任和权利。

## 权利反馈

项目维护者的 GitHub 主页为 [1to5](https://github.com/1to5)。源码仓库目前为私有,**其 Issues 不是公众投诉入口**。公开反馈入口待维护者配置,请勿向不存在的仓库提交材料。

配置公开入口后,反馈应包含受影响页面/文件/零件编号、主张权利的作品、权利依据、希望采取的措施及可回复的联系方式。不要在公开 Issue 中上传身份证件、授权合同、住址或其他敏感材料;先请求非公开沟通渠道。项目不要求以放弃法定权利为反馈前提。

本说明不是“侵权免责条款”,也不把未投诉、免费使用或注明来源当作授权。

## English summary

The site is currently operated on a non-profit basis for teachers, coaches
and students; this does not claim registered non-profit legal-entity status.
Normal use of cad.varlet.cn for modelling, teaching and coaching is permitted,
including exporting your own work. It does not grant a right to copy or host
the original application as a separate service, paid or free; see LICENSE.txt.
Your original work does not become project property. Third-party material in
imports or exports remains subject to its own licenses and rights.

The project is not an official VEX, LDCad or LDraw product. Models and animations
are not physical safety, manufacturing or competition certification. Keep
exports as backups; local browser storage is not cloud backup. Resources may
be withdrawn, leaving missing references rather than deleting your document.
Mandatory legal rights and third-party license permissions are unaffected.

The maintainer's GitHub profile is https://github.com/1to5. The private source
repository is not a public reporting channel; a public contact endpoint is
pending configuration. Do not post sensitive identity or ownership documents
in public issues. Attribution and lack of complaints do not establish permission.

Third-party rights / 第三方权利

Download / 下载原文

# Third-party notices / 第三方权利与来源

Reviewed / 核对日期:2026-11-06

This is a mixed-source project. LICENSE.txt applies only to original project
contributions where the relevant rights are held. It does not relicense the
following material, restrict permissions already granted by third parties,
or certify that all redistribution permissions have been obtained.

## Philo / SnapCAD-compatible LDraw parts

Author: Philippe Hurbain (Philo), together with any authors named in individual
file headers. Sources:

- https://www.philohome.com/vexldcad/ldcad4vex.htm
- https://www.philohome.com/snapcadunoff/snapcadpartsunoff.htm
- https://www.philohome.com/snapcadunoff/snapcadunoff.zip

Files explicitly bearing `Redistributable under CCAL version 2.0` declare the
Creative Commons Attribution 2.0 Generic license:
https://creativecommons.org/licenses/by/2.0/
Legal text: https://creativecommons.org/licenses/by/2.0/legalcode.en
Legacy declaration reference:
https://www.ldraw.org/docs-main/licenses/ldraw-org-contributor-agreement.html

Original author, license and history notices are retained. Project adaptations
include fixing the self-reference in parts/228-2677.dat, normalized archive
paths, packaging, catalogue curation and additional connection definitions.
The `reconstructed-228-2500-1457.dat` and `reconstructed-228-2500-1459.dat`
linear motion beams are approximate derivatives of Philo's 228-2500-1456.dat
and the attributed LDraw primitives, not original VEX CAD. They retain the
CCAL 2.0 declaration and author credits. The donor cross-section, holes and
bevels are reused; rail lengths and hole layout are reconstructed. The project
software license does not override the license declared by these derivatives.
Generated or modified materials must not be represented as unmodified official
LDraw/VEX releases. Files without an explicit license declaration are not
automatically assigned this license merely because they share a ZIP or author.

Philo also publishes a site-wide permission statement at
https://www.philohome.com/ allowing use for any purpose with credit and asking
users to email him. This is positive permission evidence for material whose
rights he holds, including Philo-attributed shadow data and the colour table;
it is not a grant by other authors or a blanket CC BY license. Credit:
Philippe "Philo" Hurbain, https://www.philohome.com/.
The nine PNG textures in parts/textures have no embedded author/license
declaration in the source archive; their authorship and applicable scope of
this permission have not been independently established.

## LDCad shadow, donors and flexible templates

Source: https://www.philohome.com/snldcad/snldcad.zip
LDCad author: Roland Melkert. Other authors may be named in individual files.
These resources implement connections and flexible-part templates. Preserve
their own notices. Philo-authored shadow data is distinguished above. The
remaining legacy files needing specific confirmation are shadow/p/stud.dat,
four donors (ldcvexropeseg, ldcvexrubberbandflatseg, ldcvexrubberbandrndseg,
ldcvexwireseg, all .dat), and eight templates (vexcable, vexchain,
vexchainclosed, vexrope, vexrubberbandflat, vexrubberbandround, vextread,
vextreadclosed, all .ldr).

Roland Melkert's current shadow-library repository uses CC BY-SA 4.0:
https://github.com/RolandMelkert/LDCadShadowLibrary/blob/main/LICENSE.md
That license has not been automatically assigned to every file in the older
VEX support archive. LDCad's free educational application-use terms are not
treated as a separate redistribution grant for those resources. This site
does not distribute the LDCad executable. Independent implementation of the
format does not grant rights in the source resource files.

## Official VEX CAD and converted parts

Original CAD: VEX Robotics and the relevant rights holders identified upstream.
Source and per-part conversion records: docs/cad-sources.md and the
`Original CAD: VEX Robotics. Source: ...` comments in converted DAT files.
General CAD resource page:
https://kb.vex.com/hc/en-us/articles/360044338912-CAD-Resources-for-VEX-IQ
Site terms: https://www.vexrobotics.com/terms-of-use

Conversions include tessellation, coordinate conversion, colours, edge
extraction, assembly breakdown and connection metadata. Attribution or
conversion does not itself authorize third-party hosting or redistribution.
The upstream CAD page describes personal and educational use; its prohibition
on commercial use of 3D-printed parts must not be misquoted as a complete CAD
redistribution license. The same page's educational-content notice requires
VEX attribution for reproduction, modification and redistribution, and explicit
consent for monetary gain. Those are relevant positive terms for this site's
non-profit educational use; the exact scope for transcoded CAD hosting and
embedding geometry in user exports still requires confirmation. These files are NOT relicensed
under Philo's CC BY 2.0 or the project's proprietary notice.

The following cylinder files also derive from official VEX CAD even though
their older headers do not include the standard Original CAD comment:

- parts/vex-iq-cylinder-2x.dat
- parts/vex-iq-cylinder-4x.dat
- parts/vex-iq-气动-2x冲程气缸-活塞.dat
- parts/vex-iq-气动-2x冲程气缸-缸筒.dat
- parts/vex-iq-气动-4x冲程气缸-活塞.dat
- parts/vex-iq-气动-4x冲程气缸-缸筒.dat

Original CAD credit for these files: VEX Robotics, IQ Pneumatics Kit 228-8795,
https://www.vexrobotics.com/228-8795.html. The first two are project assembly
wrappers referring to the converted body/rod geometry; they are not evidence
that the referenced CAD became project-owned.

## Software dependencies

The production build includes a generated `legal/dependency-licenses.txt` with
installed runtime dependency versions and verbatim bundled license notices.
The lockfile records exact package versions. Principal dependencies include:

- React / React DOM / scheduler — MIT; https://github.com/facebook/react
- three.js — MIT; https://github.com/mrdoob/three.js
- three-mesh-bvh — MIT; https://github.com/gkjohnson/three-mesh-bvh
- zustand — MIT; https://github.com/pmndrs/zustand
- fflate — MIT; https://github.com/101arrowz/fflate
- lucide-react — ISC and included Feather MIT notices; https://github.com/lucide-icons/lucide
- occt-import-js — LGPL-2.1 as declared by the package; https://github.com/kovacsv/occt-import-js

This software makes use of facilities provided by Open CASCADE Technology
(OCCT). occt-import-js 0.0.23 includes OCCT 7.6.1, under LGPL 2.1 with the
Open CASCADE exception version 1.0. Its exact source references are:

- Wrapper/build: https://github.com/kovacsv/occt-import-js/tree/c2148e54b456b571238d35cac037d304053d64b2
- OCCT submodule: https://github.com/Open-Cascade-SAS/OCCT/tree/d2abb6d844231cb8f29be6894440874a4700e4a5

The published legal page provides OCCT's own LGPL text, exception, and source
provenance as legal/occt-LGPL-2.1.txt, legal/occt-exception.txt and
legal/occt-source.txt. They are also included in dependency-licenses.txt.
The installed WASM was matched byte-for-byte to the upstream release;
the JS wrapper matches after line-ending normalization. Build-time SHA-256
guards require renewed review when those inputs change.

The header-file exception does not waive all source-delivery or relinking
requirements. The same-server legal page also provides occt-source-kit.zip
(complete pinned sources, SDK installer, build scripts, LGPL ESM adapter and
MIT rebuild/download helpers), checksums and instructions. download-runtime.mjs
copies and verifies existing public browser files using application-runtime.json
for local module substitution, without a duplicate ZIP or the private repository.
JS/WASM remain separate and lazy; compatible local replacements
are not rejected by a runtime signature check. A modified C++ build has been
tested through the actual STEP import Worker. These engineering checks do not
assert legal clearance of every component or third-party asset. The project's
proprietary notice expressly preserves LGPL local modification/debugging rights.

The project patches three.js LDrawLoader's normal-smoothing traversal; the
patch and upstream hash guard are in scripts/patch-ldraw-loader.mjs. This does
not change three.js's MIT license. Build tools retain their respective licenses.

## Names, user content and unresolved rights

VEX and VEX Robotics are marks of their respective rights holders; LDCad,
LDraw and other names are used for identification and compatibility. No
affiliation, endorsement, patent or trademark license is implied.

User-imported files retain their original rights. Local storage or embedding
them in a model does not grant permission to redistribute them. Copyright
notices do not create ownership of third-party, public-domain or otherwise
unprotected material. Rights questions use the contact process in TERMS.md.

中文摘要:本项目不是统一 CC BY 零件包。明确声明 CCAL 2.0 的文件按对应
CC BY 2.0 条件处理;Philo 另有需署名的网站使用许可,但不能代其他作者授权。
旧版 LDCad 资源、贴图和官方 VEX CAD 的具体范围分别核对,不一概认定无许可。
OCCT 附许可、例外、对应源码及构建材料,提供本机副本下载工具与校验清单;真实修改后的 WASM
已通过 STEP 导入测试。这是技术验证,不是对全部法律义务的合规认证。
来源登记和几何审核不等于版权授权。项目的专有许可仅覆盖有权处分的原创部分,
不能取消第三方开源许可赋予的权利。本文件是权利说明,不是完整合规审计结论。

Open CASCADE Technology

STEP 导入使用 OCCT / STEP import uses OCCT.

对应源码采用固定版本地址,与网站更新分开保存;普通访问不下载。/ Corresponding sources use an immutable URL and are stored independently of app releases; normal browsing does not download them.

本机替换:下载工具后,按说明用 Node.js 22+ 获取并校验现有静态文件,无需私有源码。清单仅在生产构建提供。/ For local replacement, run the helper with Node.js 22+ to download and verify the public files; no private repository is needed. The manifest is production-only.